Warm Air Heaters and Radiants in Stockport, Manchester

Q: Do radiant heaters use a lot of electricity?

Not necessarily - in fact, radiant heaters are often more efficient than traditional air-based systems because they heat people and objects directly rather than the air around them. This means they don’t waste energy heating large volumes of air that quickly rise or escape through open doors. Most commercial radiant heaters are gas-fired rather than electric, offering powerful, low-cost heat for large spaces. When used in the right environment - such as warehouses, workshops, or loading bays - radiant heating can reduce energy consumption by up to 25–30% compared to older, less targeted systems.

We provide reliable warm air heaters and radiants in Stockport, Manchester, offering safe, energy-efficient heating solutions for commercial and industrial premises.

Book a Site Visit

COMMERCIAL HEATING SOLUTIONS

Efficient Heating for Large Industrial Spaces

Our warm air heaters and radiants in Stockport, Manchester, are designed for large, open environments such as warehouses, workshops, and factories. They deliver fast, consistent heat distribution while keeping energy use low — perfect for busy commercial settings.

Warm air and radiant systems provide an efficient alternative to traditional central heating, particularly where wall space is limited or air circulation is key.
Our engineers handle installation, servicing, and maintenance to ensure reliable, compliant heating all year round.

Get a Quote

Running costs up to 30% lower

0 %

COMMERCIAL WARM AIR SYSTEMS

Installation, Servicing, and Repairs for All Major Brands

We work with leading warm air heater manufacturers, including AmbiRad, Reznor, Benson, Combat, and Nortek. Our engineers handle everything from design and installation to routine maintenance and emergency repairs — keeping your system efficient, compliant, and reliable all year round.

We install new warm air heating systems tailored to your building’s layout, ensuring even heat distribution and maximum energy efficiency.

All installations are fully commissioned, certified, and compliant with Gas Safe standards.

Regular servicing helps extend the life of your warm air system and prevent costly breakdowns.

We clean filters, check fans and burners, and ensure all safety devices are operating correctly.

Maintenance contracts are available for ongoing peace of mind.

If your warm air unit stops working, our engineers respond quickly to diagnose and repair the issue.

We carry common replacement parts for AmbiRad, Reznor, and other brands — resolving most faults on the first visit.

RADIANT HEATERS

Energy-Efficient Heating for Targeted Zones

Our radiant heaters in Stockport, Manchester, provide direct, efficient heat where it’s needed most — ideal for large or partially occupied spaces such as warehouses, loading bays, and workshops.

Unlike warm air systems that heat the air, radiant heaters warm people and surfaces directly, reducing energy waste and improving comfort in hard-to-heat environments.

Book a Consultation

Perfect for large open spaces. Tube heaters distribute heat evenly along their length, ideal for factories and distribution centres.

Compact and responsive. These heaters deliver focused, high-intensity warmth — great for spot-heating work areas or smaller zones.

Radiant heating targets occupied zones, cutting energy costs by heating only where and when needed.

VENTILATION SYSTEMS

Safe, Compliant Ventilation for Commercial Heating

We install and maintain ventilation systems that ensure proper airflow and combustion safety across commercial and industrial sites.

Adequate ventilation prevents harmful gases from building up and keeps heating systems performing safely and efficiently.

Combustion Safety

Proper ventilation ensures that fuel-burning appliances have the correct air supply and safely remove harmful gases like carbon monoxide.

Vent & Fan Installation

We supply and install mechanical and natural ventilation systems, including air intake vents, extraction fans, and ductwork.

Regulation Compliance

All systems are installed to meet Gas Safe and Building Regulation Part J standards, ensuring safety and legal compliance.

Our engineers can assess your site and design a compliant, efficient ventilation solution tailored to your heating system’s needs.

SAFETY & TESTING

Ensuring Every System Operates Safely and Efficiently

Our Gas Safe engineers carry out full safety testing and certification for every warm air or radiant system we install and maintain. From CO checks to combustion analysis, we make sure your heating operates safely, efficiently, and in full compliance with regulations.

Tired of Unreliable Heating?

Avoid costly breakdowns and temperature drops. Our engineers replace outdated units with dependable, energy-efficient systems built to last.

Expert Insights into Commercial Heating Solutions

YOUR QUESTIONS, ANSWERED

Not sure which heating system suits your premises best? We’ve answered the most common questions to help you learn how each system performs, saves energy, and supports safe operation.

Speak to an expert

Do radiant heaters warm a room?

Radiant heaters work differently from conventional systems – they don’t heat the air in a room but instead warm people, equipment, and surfaces directly through infrared radiation (similar to how the sun feels warm on your skin).

This approach is especially effective in large or open areas where warm air would quickly rise or escape.

Instead of wasting heat, radiant systems deliver warmth precisely where it’s needed – in occupied zones.

This results in a comfortable working temperature even in high-ceilinged or draughty environments.

Do radiant heaters use a lot of electricity?

Not necessarily – in fact, radiant heaters are often more efficient than traditional air-based systems because they heat people and objects directly rather than the air around them.

This means they don’t waste energy heating large volumes of air that quickly rise or escape through open doors.

Most commercial radiant heaters are gas-fired rather than electric, offering powerful, low-cost heat for large spaces.

When used in the right environment – such as warehouses, workshops, or loading bays – radiant heating can reduce energy consumption by up to 25–30% compared to older, less targeted systems.

How energy-efficient are warm air and radiant heaters?

Modern warm air and radiant heating systems are designed with energy efficiency in mind.

High-performance burners, advanced controls, and proper zoning can help achieve efficiency levels above 90%.

Radiant systems reduce wasted heat by warming only active zones, while warm air systems can be paired with destratification fans to push heat back down from the ceiling – improving efficiency by up to 20%.

Choosing the right system for your building’s layout can significantly cut running costs and carbon emissions.

What industries benefit most from warm air or radiant heating?

Both warm air and radiant heaters are versatile, but they’re particularly beneficial for large commercial and industrial settings, including:

Warehouses & Factories – even heat distribution in wide, open spaces.
Workshops & Garages – targeted warmth in specific work zones.
Sports & Leisure Facilities – efficient comfort in large or high-ceilinged halls.
Schools & Public Buildings – reliable, safe heating for occupied spaces.
Care Homes – consistent temperature control for comfort and safety.

The right system depends on how the space is used — radiant for zonal heat, warm air for full coverage, or a combination of both for optimal efficiency.

What’s the difference between warm air and radiant heating?

Both systems provide effective commercial heating, but they operate very differently:

Warm Air Heating: Heats and circulates air throughout a space using fans. It’s ideal for evenly warming enclosed or well-insulated areas like factories, offices, and schools.
Radiant Heating: Uses infrared heat to warm surfaces and people directly rather than the air. It’s best for open or partially occupied environments such as warehouses or loading bays.

Many businesses use a combination of both, depending on their layout and usage. For example, radiant heating might target loading zones while warm air units heat office or production areas.

Warm Air Heaters and Radiants in Stockport, Manchester

Efficient Heating for Large Industrial Spaces

Installation, Servicing, and Repairs for All Major Brands

Installation

Maintenance

Repairs

Energy-Efficient Heating for Targeted Zones

Radiant Tube Heaters

Plaque Heaters

Energy Efficiency